|
Mastercam X9 and Dynamic Motion on Display at EMO 2015
9/8/2015 |
|
|
CNC Software, Inc., is travelling to Milan to support esteemed Italian Mastercam Reseller Cadline SA at EMO show. EMO attendees will get to experience the most powerful mastercam machining software yet. Stop by Hall 2, Booth G17 at the Fiera Milan in Milan, Italy, October 5 to 10 for a look at Mastercam X9 which introduces Dynamic Motion improvements, Multiaxis enhancements, and many Design and System features to make your job easier. And stop by the Haas Automation booth; they will be machining with Mastercam's Dynamic Motion technology on the show floor.
Dynamic Motion Technology
Dynamic Motion toolpaths follow a proprietary and sophisticated set of rules that take into consideration a broad data set. To create the most efficient cutting motion possible, Dynamic toolpaths calculate not only the area where metal will be removed, they also take into account the changing condition of the metal throughout various stages of machining.
Design and Multiaxis Features
Dynamic Xform allows you to switch between gnomon manipulation and geometry manipulation mode at any time. Solid Disassemble is a new Model Prep function that takes an assembly and lays each body out in a single pane. The associativity between solids and toolpaths has been greatly improved. Now when bodies are edited, only the toolpaths directly affected by the change in the solid body are marked dirty.
The new Multiaxis Link ensures reposition moves between 2 through 5-axis operations are safe and collision-free. Mulitiaxis Link is an operation that takes a list of toolpath operation and a safety zone shape as input. Mastercam X9 introduces improved processing logic for advanced multiaxis toolpaths. Select Multiaxis toolpaths now process in the Multi-Threading Manager, streamlining your 2- through 5-axis workflow experience. |
|
Related Exhibition:
|
|
|
 |
|
EMO Milano 2015
|
machine tool world exhibition
10/5/2015 - 10/10/2015
Venue: Fiera Milano, Milan, Italy
|
|
|
|
|
|
|
